Table of Contents
Advertisement
Fig. 96: Identifying Engine Coolant Pump
Courtesy of HYUNDAI MOTOR CO.
REASSEMBLY
1. Clean the gasket surfaces of the coolant pump body and the cylinder block.
2. Install a new coolant pump gasket to the coolant pump and tighten the bolts to the specified torque.
Tightening torque
Coolant pump to cylinder block:
A: 12-15Nm (120-150kg.cm, 9-11lb.ft)
B: 20-27Nm (200-270kg.cm, 15-20 lb.ft)
Fig. 97: Locating Coolant Pump Bolts
Courtesy of HYUNDAI MOTOR CO.
3. Install the timing tensioner and timing belt. Adjust the timing belt tension.
4. Install the timing belt covers.
5. Install the coolant pump pulley and drive belt, and then adjust the belt tension.
6. Refill the system with clean coolant.
7. Run the engine and check for leaks.
viernes, 19 de febrero de 2021 07:12:59 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 108
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
