Table of Contents
Advertisement
Fig. 160: Installing Flange & Crankshaft Sprocket
Courtesy of HYUNDAI MOTOR CO.
2. Install the camshaft sprocket and tighten the bolt to the specified torque.
Tightening torque
Camshaft sprocket bolt: 80-100Nm (800-1000kg.cm, 59-74lb.ft)
3. Install the idler and tighten the idler bolt to the specified torque.
Tightening torque
Idler bolt: 43-55Nm (430-550kg.cm, 32-41lb.ft)
4. Align the timing marks of the camshaft sprocket and crankshaft sprocket, with the No.1 piston placed at
top dead center on its compression stroke.
viernes, 19 de febrero de 2021 07:13:00 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 174
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
