Table of Contents
Advertisement
Fig. 113: Checking Continuity Between Oil Pressure Switch Terminal & Body - Fine Wire Pushed
Courtesy of HYUNDAI MOTOR CO.
REASSEMBLY
OIL PUMP
1. Install the outer and inner gears into the front case. Make sure that the inner and outer gears are installed
in the same direction as shown.
2. Install the oil pump cover and tighten the bolts to the specified torque. After the bolts have been
tightened, check to ensure that the gear turns smoothly.
Tightening torque
viernes, 19 de febrero de 2021 07:12:59 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 125
© 2011 Mitchell Repair Information Company, LLC.
Advertisement
Table of Contents
