Hyundai Accent GL 2002 Manual page 30

Fig. 27: Standard Value Table
Courtesy of HYUNDAI MOTOR CO.
NOTE:
1. The belt tension must be measured half - way between the specified
pulleys.
2. When a new belt is installed, adjust the tension to the central value of the
standard range indicated under "New" in the above table. Let the engine
idle for 5 minutes or more, and check the standard value indicated under
"Inspection."
3. When adjusting a belt which has been used, or newly installed, after 5
minutes or more of operation, refer to the standard value indicated under
"Used" in Fig. 27.
4. Refer to the standard value indicated under "inspection" for periodic
inspections.
viernes, 19 de febrero de 2021 07:12:57 a. m.
2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Page 30 © 2011 Mitchell Repair Information Company, LLC.