Hyundai Accent GL 2002 Manual page 37

2002 Hyundai Accent GL
2002 ENGINE Engine Mechanical System (DOHC 1.6L) - Accent
Fig. 34: Checking Top Surface Of Block For Warpage
Courtesy of HYUNDAI MOTOR CO.
3. Measure the cylinder bore with a cylinder gauge at three levels in the direction of A and B. If the cylinder
bores show more than the specified out-of-round or taper or if the cylinder walls are badly scuffed or
scored, the cylinder block should be rebored and honed. Oversize pistons and rings must be fitted.
Cylinder I.D: 76.5 - 76.53 mm (3.0118 - 3.0130 in.)
Cylinder I.D taper: 0.01 mm (0.0004 in.) or less
viernes, 19 de febrero de 2021 07:12:57 a. m. Page 37 © 2011 Mitchell Repair Information Company, LLC.