Batching - Elcometer 456 User Manual

R

8 BATCHING

1. To use BATCH facility press DATA soft key
2. Select OPEN NEW BATCH or OPEN EXISTING BATCH to add
readings
3. Select REVIEW BATCHES to investigate stored readings
4. Follow on screen instructions - See Figure 2 for example
BATCH SOFT KEY ALTERNATIVES
Batch Number: Indicates batch number in use
Counted Average Mode: Where 'n' is number of readings taken
by the gauge to provide one single average reading
Standard Batch Mode: Gauge set in batch mode to allow data to be collected in groups
6
Figure 2.
www.elcometer.com
Eng