Panasonic AV-HS04M7D Operating Instructions Manual page 8

Updating the AV-HS450 software version
 Insert the SD memory card into the SD memory card slot of the AV-HS450.
 Press the [SDCard] button to light its indicator, and display the SDCard menu.
 Turn [F1] to display the File sub menu.
If the SD memory card has not been inserted, "No Card" will be displayed for the
Mode item.
 Turn [F2] to select "Init" for the Mode item, and press the [F2] switch.
<Menu display>
SDCard 1 | Mode↓ | Select |
File |  Init| -|
 When the [F5] switch is pressed, the "Init ↓ " item changes to "Init?".
 Turn [F5] to select "Yes", and press the [F5] switch.
This causes initializing to start.
<Menu display>
SDCard 1 | Mode↓ | Select |
File |  Init| -|
 When initializing is completed, the following folders are created on the SD memory
card.
HS400
| Init↓
| No
| Init?
| Yes
IMAGE
SYSTEM
13 (E)
Updating the AV-HS450 software version
3. Copying the version up software to the SD memory card
Copy the version up software from the CD-ROM to the SD memory card.
 Eject the initialized SD memory card from the AV-HS450, and insert it into the SD
memory slot of the personal computer.
(In the example given here, insert the SD memory card into the D: drive.)
 Insert the CD-ROM provided with the board into the CD-ROM drive of the personal
computer.
(In the example given here, insert the CD-ROM into the E: drive.)
 Copy the two files in the "E:\VersionUpSoftware" folder on the CD-ROM into the
"D:\HS400\SYSTEM" folder on the SD memory card.
Two files to be copied
 v1tov2.45d:
Step-up file
 v2.45d: Version update file
(Where v2 indicates the version)
 After the files have been copied, eject the SD memory card from the personal
computer.
4. Loading the copied files into the AV-HS450
Load the version up software copied onto the SD memory card into the AV-HS450.
1. Loading the step-up file
 Insert the SD memory card containing the copied files into the SD memory card slot
of the AV-HS450 again.
 Press the [SDCard] button to light its indicator, and display the SDCard menu.
 Turn [F1] to display the File sub menu.
 Turn [F2] to select "Load" for the Mode item, and press the [F2] switch.
<Menu display>
SDCard 1 | Mode↓ | Select | LoadFile

File | Load| FMEM1|
Exec↓
No
14 (E)