Panasonic AV-HS04M7D Operating Instructions Manual page 32

Operation (3D mode)
3D mode checkpoints
When the 3D mode has been selected, restrictions on some functions may apply, and there may be some difference from when
the 2D mode has been selected.
Item
System format selection
Wipe pattern selection
Image effects
Key settings
PinP settings
DSK1 and DSK2 settings
Transfer of images to
frame memories
Saving of images on
SD memory cards
Down-converter output
Red tally and green tally
signal output
The 480/59.94i and 576/50i formats cannot be selected.
Only WIPE is available as the wipe pattern which can be selected with background
transitions. None of the SQ1, SL1, 3D1, SQ2, SL2 and 3D2 patterns can be selected.
Image effects (paint, mono color, mosaic and defocus) cannot be added.
(Pressing the IMAGE A button or IMAGE B button will have no effect.)
The same settings are applied to Lch and Rch.
 The same settings are applied to Lch and Rch.
(Only "PinP" appears as the menu.)
The [PinP1 ON] button is used to select On or Off.
The [PinP2 ON] button will have no effect even if it is operated.
 When the keystone function has been enabled, PinP composition cannot be
performed.
 The shape of the PinP images is always square.
 Edges cannot be added to the images.
 The same settings are applied to Lch and Rch.
When materials selected by the AUX bus are transferred to the frame memories, it is the
following images that are transferred.
FMEM1 and FMEM3:
The Lch images of the materials selected by the AUX bus are transferred.
FMEM2 and FMEM4:
The Rch images of the materials selected by the AUX bus are transferred.
The filenames of the images saved will differ depending on the frame memory setting.
FMEM menu  Mode sub menu  when "LR" has been selected:
Image filenames of the Lch (FMEM1 and FMEM3): HSxxx_L.bmp
Image filenames of the Rch (FMEM2 and FMEM4): HSxxx_R.bmp
FMEM menu  Mode sub menu  when "Sepa" has been selected:
Image filenames: HSxxx.bmp
Note: "xxx" is a running number from 001 to 999 which is automatically assigned.
 When "LbyL" has been selected as the 3D output format for OUTPUTB1 and
OUTPUTB2, DC (down-converter) cannot be selected as the output mode.
 When "LbyL" has been selected as the 3D output format for OUTPUTA1 and
OUTPUTA2, DC (down-converter) cannot be selected as the output mode.
(When the AV-HS04M7 is connected)
The tally signal of the even-numbered input (Rch) which belongs to the same pair of
connectors as the odd-numbered input (Lch) is output at the same time.
Therefore, only the odd numbers (R-Tly1, 3, 5 ... 17, G-Tly1, 3, 5 ... 17) can be set for
the assign items of the GPI Output ports.
41 (E)
Description