Panasonic AV-HS04M7D Operating Instructions Manual page 31

Operation (3D mode)
"3D status monitor" Prllx
Approx.
–7.5 %
Jutting out direction
Histogram of amount of parallax
(Lch and Rch)
 Shoot in such a way that the distribution of the amount of parallax between Lch and Rch is brought within about 3 % of the
screen width.
 Under the conditions where a stationary subject has been shot, adjust the vertical positions of the cameras (Lch and Rch)
so that the bar used for input signal (Lch and Rch) compensation is made as long as possible.
Note
The amount of parallax may not be displayed correctly for images containing the kinds of subjects listed below.
 Subjects with a low luminance
 Subjects which change cyclically in the horizontal
direction
"3D status monitor" Grid
 A grid is displayed at intervals of about 3 % along the width of the screen.
 Select LRMIXa or LRMIXb as the 3D output format, and shoot so that the amount of parallax between Lch and Rch come
within the grid width.  Refer to "Setting the output signals".
Amount of parallax
Approx.
0 %
–3 %
 Subjects with minimal changes in the horizontal
direction
 Subjects whose amount of parallax exceeds 7.5 %
40 (E)
Approx. Approx.
+3 % +7.5 %
Recessed direction
Bar used for input signal (Lch and Rch)
compensation