Advertisement
Quick Links
Website:
www.perlesmith.com
TV Wall Mount
Instruction Manual
Model: PSSL1
Thank you for choosing this PERLESMITH product! At PERLESMITH we
strive to provide you with the best quality products and services in the
industry. Please share your experience of our product with others at
www.perlesmith.com/pages/reviews if you are satisfied. Should you have
any issues, please don't hesitate to contact us.
Technical Support:
1-800-556-6806 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
supportus@perlesmith.com (US）
supportca@perlesmith.com (CA)
V2.0
Advertisement
Related Manuals for Perlesmith PSSL1
Summary of Contents for Perlesmith PSSL1
- Page 1 Instruction Manual V2.0 Model: PSSL1 Thank you for choosing this PERLESMITH product! At PERLESMITH we strive to provide you with the best quality products and services in the industry. Please share your experience of our product with others at www.perlesmith.com/pages/reviews if you are satisfied. Should you have any issues, please don't hesitate to contact us.
-
Page 2: Important Safety Information
If your TV VESA is greater than 200x200 mm/7.9x7.9in. or less than VESA 75x75mm/3x3 in., this mount is NOT compatible. If this mount is NOT compatible, please contact customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA) to find a compatible mount. Verify Your Wall Construction... -
Page 3: Supplied Parts And Hardware
Product Support line at 1-800-556-6806 or customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA). • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1... - Page 4 Bolts [Only one bolt size fits your TV] Note: The bolts are shown in accordance with the actual size M4 x 15mm M4 x 30mm [D1] x4 [D2] x4 M6 x 15mm M6 x 30mm [E1] x4 [E2] x4 Supplied Parts and Hardware for Step 2 to Step 3 Level Wall Plate Note:...
- Page 5 Please Note: When using the spacers it is important to note that they can be used in multi-layers (meaning stacked). If you have any difficulty understanding how to install the TV bolts or spacers, please contact customer service at supportus@perlesmith.com (US)/ supportca@perlesmith.com (CA).
- Page 6 Option B (For Round Back TV) D2/E2 Alternate Spacer Setups C1/C2 Option C (For TV with A “Bump”) Spacers may be necessary for 2 holes ONLY. D2/E2 D1/E1 C1/C2 Alternate Spacer Setups Option D For cable interference or inset holes, use spacers to create extre space between the TV and TV bracket.
- Page 7 Step 2 Attach the Wall Plate [01] to Wall For wood stud installation, follow STEP 2A For concrete installation, follow STEP 2B Step 2A Wood Stud Option WARNING: ●Avoid potential personal injury or property damage! DO NOT over-tighten the lag screws [A1]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly against the wall plate.
- Page 8 Drill 2 pilot holes using a 5/32 in.(4 mm) diameter drill bit. Make sure the depth is not less than 2 23/64 in.(60mm). 2 23/64 in. (60mm) ø5/32 in.(4mm) Install the wall plate using lag screws [A1] and washer [A2]. Tighten the lag screws [A1] only until the washers [A2] are pulled firmly against the wall plate.
- Page 9 2A-1 Position wall plate [01] at your desired height, level wall plate [01] and mark the pilot hole locations. 2A-2 Drill 4 pilot holes using a 3/8 in. (10mm)diameter drill bit. Make sure the depth is not less than 2 9/16 in.
- Page 10 Step 3 Hang the TV onto the Wall Plate Iocking...
- Page 11 PERLESMITH product! All of us at PERLESMITH do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
- Page 12 PERLESMITH offers products in these categories Anti-tip Straps AV Shelves TV Stands Speaker Stands TV Carts Full Motion Mounts Tilt Mounts Corner Mounts Please remember us when you need one.