Charging And Discharge The Battery - Amico Hummingbird User Manual

Section 6: Adjustments
Charging and Discharging the Battery
1. Discharge the cart completely. You may connect additional load (i.e. computer, laptop, monitor) to speed up the
discharge process.
2. When the discharge process is completed, double check to make sure that all screens and lights are off and
unresponsive.
3. Recharge the cart for 12 hours or until it is full.
4. Repeat Steps 1-3 for one more time is required.
To disconnect the battery:
WARNING: THE FOLLOWING STEPS MUST BE PERFORMED BY AUTHORIZED PERSONNEL.
NOTE: USE CATION WHEN USING STEELS TOOLS. DO NOT CONNECT POSITIVE "+" AND NEGATIVE "-" BATTERY
TERMINALS. THIS WILL SHORT THE BATTERY AND CAUSE DAMAGE TO THE UNIT.
33 Amico Accessories Inc.