Microsd Card - Samsung Galaxy Feel Instruction Manual

microSD card
You can attach microSD card (including microSDHC card and microSDXC
card) to the terminal and use it.
• The terminal supports microSD cards of up to 2 GB, microSDHC cards of
up to 32 GB and microSDXC cards of up to 256 GB (as of May, 2017).
However, actual operations are not guaranteed for all microSD cards
sold commercially.
For compatible microSD cards, contact each manufacturer of microSD
card.
• The terminal supports up to Class 10 speed microSD cards, the UHS
speed class is Class 1.
• microSDXC card can be used only with SDXC compatible devices. Do
not insert microSDXC card into a device incompatible with SDXC. Doing
so may damage data saved in the microSDXC card.
• To use microSDXC card with the data damaged again, formatting the
microSDXC card with SDXC compatible device is needed (All data is
erased).
• To copy data to/from SDXC incompatible device, use memory card
compatible with the standard of device for copying to/from such as
microSDHC card or microSD card.
Attaching microSD card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Place the IC (metallic) surface of the microSD card down on
the docomo nano UIM card/microSD card tray
4
Insert the docomo nano UIM card/microSD card tray into
the terminal
• Take care to insert the docomo nano UIM card/microSD memory
tray in the correct direction. If the direction you insert the docomo
nano UIM card/microSD card tray is incorrect, it may be damaged.
24
Before using the terminal