Table of Contents
Advertisement
When the other device requests for pairing
When pairing request for Bluetooth communication screen appears, tap
"OK" as required.
Canceling connection
On the Bluetooth device list, tap a connected device.
Canceling pairing
1
From the Home screen,
"Bluetooth"
2
of a device you want to cancel → "Unpair"
Sending/Receiving data via Bluetooth
• Set the Bluetooth function to ON beforehand to be detectable.
Sending data via Bluetooth
You can send contacts (contact data in vcf format) or files such as still
images or videos, etc. to a device (PC etc.) compatible with Bluetooth.
• For sending, perform the operation from the menu such as "Share" or
"Send" of each app.
Receiving data via Bluetooth
1
If "File transfer" screen appears, tap "ACCEPT"
•
appears on the status bar and data reception starts.
• Reception condition can be checked by the Notification panel.
• After completion of the reception, display Notification panel and tap
"File received" to display the list of received data. Tap data you want
to view/play, you can check received data.
→ "Settings" → "Connections" →
NFC communication
NFC is an abbreviation of Near Field Communication that is an international
standard proximity wireless communication method specified by ISO
(International Organization for Standardization). By using reader/writer
function (R/W) or device communication function (P2P), put the terminal
close to NFC tag to receive data, send/receive data to/from other device
equipped with NFC module.
• For holding over the other device, see P.77.
Enabling NFC Reader/Writer, P2P function
To send/receive data between the terminal and an NFC equipped
mobile phone etc., turn Reader/Writer, P2P ON.
• When "Android Beam" is set to ON, you can send/receive contents such
as web pages or contacts to/from a device with P2P function installed.
1
From the Home screen,
"NFC/Osaifu-Keitai settings" → "Reader/Writer, P2P"
2
• To use Android Beam, tap "Android Beam" on "NFC/Osaifu-Keitai
settings" screen →
Sending/Receiving data
1
Display a content to send on the terminal/recipient device
2
Put
marks of the terminal and the recipient device closer
3
Tap a screen on the terminal/perform sending operation on
the recipient device
• The content is sent/received.
• If the app selection screen appears, select an app to use.
Information
• If you perform sending operations from the terminal and the other
device at the same time, sending may fail.
• While the screen is locked, NFC tag information cannot be sent/
received.
• When NFC/Osaifu-Keitai Lock is set, Android Beam cannot be used.
• For some apps, Android Beam is unavailable.
• Actual communications are not guaranteed for all devices equipped
with Reader/Writer, P2P.
125
→ "Settings" → "Connections" →
.
Data communication
Advertisement
Table of Contents
