Docomo Nano Uim Card - Samsung Galaxy Feel Instruction Manual

docomo nano UIM card
docomo nano UIM card is an IC card storing user information such
as phone numbers.
• Only the docomo nano UIM card is available for the terminal. If you have a
mini UIM, UIM or FOMA card, bring it to docomo Shop to replace.
• If docomo nano UIM card is not inserted, you cannot use functions such
as calling, sending/receiving SMS, packet communication.
• In Japan, calls to emergency telephone numbers (110, 119, 118)
cannot be made if docomo nano UIM card is not installed.
• For details on handling docomo nano UIM card, refer to the docomo nano
UIM card manual.
• The included SIM ejector tool (sample) is required to attach/remove the
docomo nano UIM card or NTT DOCOMO website.
Security codes of docomo nano UIM card
The docomo nano UIM card has security code, named PIN code (P.112).
Installing/Removing a docomo nano UIM card
Attaching docomo nano UIM card
1
Insert the tip of the SIM ejector tool into the docomo nano
UIM card/microSD card tray eject hole horizontally
The docomo nano UIM card/microSD card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a
fault.
2
Pull out the docomo nano UIM card/microSD card tray in a
straight line
3
Place the IC surface of the docomo nano UIM card down on
the docomo nano UIM card/microSD card tray
• Fit the docomo nano UIM card securely into the tray or it may come
off when you try to insert it into the slot.
4
Insert the docomo nano UIM card/microSD card tray into
the terminal
• Take care to insert the docomo nano UIM card/microSD memory
tray in the correct direction. If the direction you insert the docomo
nano UIM card/microSD card tray is incorrect, it may be damaged.
22
Notch
IC
Before using the terminal