Samsung Galaxy Feel Instruction Manual page 103

Data usage
Enable/disable mobile data communication or set upper limit of data
communication. Also set a period of time for measuring amount of
communications.
1
From the Home screen,
"Data usage"
• Data usage screen appears and estimated value of mobile data
usage for a period and for each app.
• Set "Mobile data" to ON to enable Internet access via mobile networks.
• Tap "Mobile data usage" →
data communication usage. To set the limit, set "Data limit" to ON.
Limiting background data communication
From the data usage screen, tap "Data saver" →
data communication automatically made by apps.
Tap "Allow app while Data saver on" to restrict usage of mobile data
of Individual apps.
Displaying status of Wi-Fi use
Tap "Wi-FI data usage" to display the estimated amount of Wi-Fi data
usage for a period and for each app.
Restricting use of Wi-Fi network for using Wi-Fi tethering
Tap "Restrict networks" to prevent background apps from using
specified Wi-Fi network.
Information
• Displayed data usage volume is an estimate. It may be different
from the actual one. You can check your data usage volume at My
docomo.
• Note that mobile data communication will suspend when data usage
volume reaches to the set limit volume. To resume the mobile data
communication, on the pop-up screen of "Mobile data turned off", tap
"TURN ON MOBILE DATA", or change the setting value of the data
usage limit.
→ "Settings" → "Connections" →
to set the limit and warning of mobile
to restrict mobile
Airplane mode
Disable all wireless connections.
1
From the Home screen,
"Airplane mode"
2
Information
• Alternatively, tap "Airplane mode" on the notification panel to switch
the setting.
• If you enable "Airplane mode", Wi-Fi, Bluetooth, and functions of the
NFC such as reader/writer, P2P, etc. are turned OFF. However, you
can turn them ON again during Airplane mode.
NFC/Osaifu-Keitai Setting
Lock Osaifu-Keitai function, or make settings so that you permit/deny
sending/receiving of a content/file etc. via Reader/Writer, P2P function.
1
From the Home screen,
"NFC/Osaifu-Keitai settings"
2
Tap an item to set
Item
NFC/Osaifu- Lock NFC/Osaifu-Keitai function.
Keitai Lock
Reader/Writer, Set whether to permit exchange of data when
P2P putting the terminal close to the other device with
NFC module built-in or Reader/Writer, P2P function
installed. → P.125
Android Beam Set whether to permit to send/receive web page links
or contents of contacts to/from other device with P2P
function installed.
• Enable "Reader/Writer, P2P" before using.
NFC Type Set communication mode from "FeliCa / Type A / Type
Settings B (Default)", "FeliCa / Type A" or "FeliCa / Type B".
101
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
Description
Settings