Samsung Galaxy Feel Instruction Manual page 105

■ Setting USB tethering
You can connect to the Internet by connecting the terminal to a PC via a
USB cable A to B 01 (sold separately).
1
Insert microUSB (B) plug of the USB cable A to B into the
external connection jack of the terminal
• For connecting method, see "Connecting with USB cable A to B"
(P.126).
2
Insert USB plug of the USB cable A to B plug into a PC USB
port
3
From the Home screen,
"Tethering"
4
"USB tethering"
Information
• During USB tethering, you can't look inside this terminal and microSD
card from connected PC.
• Operating environments for USB tethering are as follows. DOCOMO
is not liable for the operation after upgrading/adding/changing OS.
- Windows 7
- Windows 8.1
- Windows 10
→ "Settings" → "Connections" →
Setting access point
Access point for connecting the Internet (sp-mode) is already registered.
You can add or change it if necessary.
For details on sp-mode, refer to NTT DOCOMO website.
https://www.nttdocomo.co.jp/service/spmode/
When using mopera U or Business mopera Internet, add access point manually.
For details on mopera U, refer to mopera U website.
https://www.mopera.net/
■ Checking the access point in use
1
From the Home screen,
"Mobile networks" → "Access Point Names"
■ Setting an access point additionally
1
From the Home screen,
"Mobile networks" → "Access Point Names" → "ADD"
2
"Name" → Enter a name of network profile to create → "OK"
3
"APN" → Enter the access point name → "OK"
4
Enter the other items required by the network operator
• Do not change "MCC" and "MNC" other than 440 and 10,
respectively. If they are changed, they are not displayed on the
screen.
5
→ "Save"
Information
• When you changed settings of MCC or MNC and access points
are not displayed, initialize the access point or set an access point
manually.
■ Initializing an access point
By initializing an access point, the default state is restored.
1
From the Home screen,
"Mobile networks" → "Access Point Names"
2
→ "Reset to default" → "RESET"
103
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
→ "Settings" → "Connections" →
Settings