Power Liftgate - If Equipped - Chrysler Pacifica 2022 Owner's Manual

94 GETTING TO KNOW YOUR VEHICLE
WARNING!
Driving with the liftgate open can allow

poisonous exhaust gases into your vehicle.
You and your passengers could be injured by
these fumes. Keep the liftgate closed when
you are operating the vehicle.
If you are required to drive with the liftgate

open, make sure that all windows are closed,
and the climate control blower switch is set at
high speed. Do not use the recirculation
mode.
P L — I E
OWER IFTGATE F QUIPPED
The power liftgate may be opened or closed in
several ways:
Overhead console liftgate button

Key fob

Outside handle (opens liftgate only)

Rear Interior Power Liftgate button (when lift-

gate is open)
Hands-Free Liftgate (if equipped) — opens lift-

gate only
Using the above ways to open or close the liftgate:
When the liftgate is fully closed, the liftgate will

open
When the liftgate is fully open, the liftgate will

close
When the liftgate is moving, the liftgate will

reverse
Push the Power Liftgate button on the overhead
console to open or close the liftgate.
Push the liftgate button on the key fob twice within
five seconds to open or close the liftgate.
Overhead Console Power Switches
1 — Liftgate
2 — Left Sliding Door
3 — Sliding Door Power Off
4 — Right Sliding Door
The key fob and the overhead console button will
operate the liftgate when the liftgate is locked. The
outside handle requires the liftgate to be unlocked.
If the vehicle is equipped with Passive Entry,
pressing the touch pad on the outside handle or
Hands-Free Liftgate foot activation (if equipped)
will unlock and open the liftgate, with a valid
Passive Entry key fob within 5 ft (1.5 m) of the
liftgate handle.
NOTE:
To open the liftgate, the Hands-Free Liftgate

foot activation (if equipped) requires a valid
Passive Entry key fob within 5 ft (1.5 m) of the
door handle.
When you push the Passive Entry button, either

only the liftgate will unlock, or all the doors and
the liftgate will unlock, depending on the
selected setting in the Uconnect system.
Tones are sounded and the turn signals are

flashed with liftgate movements. These alerts
can be turned on or off in Uconnect Settings
Ú page 180.