Chrysler Pacifica 2022 Owner's Manual page 328

326 SERVICING AND MAINTENANCE
01 = Number representing the year in which the tire was manufactured (two digits)
01 means the year 2001

Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could

represent the 3rd week of 1981 or 1991
Tire Terminology And Definitions
Cold Tire Inflation Pressure
Maximum Inflation Pressure
Recommended Cold Tire Inflation Pressure
Term
B-pillar
Tire Placard
EXAMPLE:
The vehicle B-pillar is the structural member of the body located behind the
front door.
Cold tire inflation pressure is defined as the tire pressure after the vehicle has
not been driven for at least three hours, or driven less than 1 mile (1.6 km)
after sitting for a minimum of three hours. Inflation pressure is measured in
units of PSI (pounds per square inch) or kPa (kilopascals).
The maximum inflation pressure is the maximum permissible cold tire
inflation pressure for this tire. The maximum inflation pressure is molded into
the sidewall.
The manufacturer recommended cold tire inflation pressure as shown on the
tire placard.
A label permanently attached to the vehicle describing the vehicle's loading
capacity, the original equipment tire sizes and the recommended cold tire
inflation pressures.
Definition