Chrysler Pacifica 2022 Owner's Manual page 37

Recline Lever
The bench seat does not stow in the floor, but is
removable for added cargo space.
Removing The Bench Seat
1. Adjust the driver and passenger seats
forward to allow room for the bench seat
removal.
2. Raise the armrest completely, then lift the
recline lever located on the outboard side of
the seat to fold the seatback flat against the
seat cushion.
Folded Position
3. Pull the release strap located behind the seat,
in the center near the floor to release the
latches.
Release Strap Location
GETTING TO KNOW YOUR VEHICLE
4. Once the latches are released, tilt the entire
seat toward the front of the vehicle. The seat
can now be removed through either sliding
side door, or through the liftgate.
Tilt Bench Seat Forward
NOTE:
Due to the weight of the bench seat, it is recom-

mended that two people are utilized for its
removal.
When storing the removed bench seat, it is

important to keep the seatback in the folded
position.
35
2