Connection And Scan Options - Wasp WWS150i User Manual

Check Version
Scan the Check Version barcode to verify your current firmware's version number.
Link Quality On/Off
The Link Quality affects the transmission quality. When Link Quality is turned on (default setting), data transfer is more secure, but
slower. If you notice that your transmissions to the host are too slow, you can try turning the Link Quality setting to off.
Set Connection
Scan this barcode to break your current connection and enable your device to connect to a new Bluetooth host.
Bluetooth SPP (Bluetooth COM)
The Bluetooth SPP (Serial Port Protocol) creates a virtual Bluetooth comport. This setting is not recommended. Only use this option if
you have software capable of capturing data off of a comport.
Bluetooth HID
Use this setting (on by default) to pair with most Bluetooth connections. Bluetooth HID works just like a keyboard..
Check Version
Link Quality On
Set Connection
Bluetooth SPP (Bluetooth COM)
Bluetooth HID
7

CONNECTION AND SCAN OPTIONS

Link Quality Off
Chapter 4