Replacing/Repairing; Drive Belts - Walker MBSY Operator's Manual

Maintenance Instructions

REPLACING/REPAIRING

To prevent accidental starting of the
engine when replacing parts or repairing
the machine, remove the key from the
ignition switch
electrical plug on the fuel shut-off
solenoid.
IMPORTANT: ALWAYS use genuine factory re-
placement parts. Substitute parts CAN result in prod-
uct malfunction and possible injury to the oper ator
and/or others.
60
DANGER
and disconnect the
Ground
Drive Belt
Belt Locations (Engine Hidden for Clarity)
REPLACING/REPAIRING

Drive Belts

There are five (5) individual drive belts on the ma-
chine:
•
Engine/PTO Belt (Matched Set of 3)
•
Ground Drive Belt
•
Alternator Belt (Engine)
The belts may be removed and replaced using the
procedures described on the following pages.
Engine/PTO Belt
(Matched Set)