Neutral Position Adjustment - Walker MBSY Operator's Manual

Maintenance Instructions
Step 3 - Neutral Position Adjustment
1. With the Forward Speed Control (FSC) in NEU-
TRAL-PARK, the lever should be straight up.
Adjust by loosening the jam nuts on the FSC Rod
and turn the rod to attain the straight up position.
Tighten the jam nuts.
FSC Position
FSC Rod
FSC Lever Adjust
2. The initial adjustment for neutral is to loosen the
jam nuts on each end of the Control Rod and turn
the rod to achieve a measure ment of 5 in.
(127 mm) between the jam nuts. Be sure to tight-
en jam nuts before making the measurement.
3. Block the tractor up so the drive tires are off the
ground.
ADJUSTMENTS
5 in.
(127 mm)
69