Page 1
All manuals and user guides at all-guides.com S/M NO. : TSLM10MEF0 Service Manual LCD TV CHASSIS : SL-100XB,SL-110XB SL-100MB,SL-110MB Model : LX32L1*** LX32L2*** LM32L1*** LM32L2*** LP32L1*** LP32L2*** HY-LCD32L2 HY-LCD32R1 LX42L1*** LX42L2*** LM42L1*** LM42L2*** LP42L1*** LP42L2*** HY-LCD42L2F HY-LCD42R1F Caution : In this Manual, some parts can be changed for improving. their performance without notice in the parts list.
All manuals and user guides at all-guides.com 1. Safety Precaution (1) When moving or laying down a LCD Set, at least two people must work together. Avoid any impact towards the LCD Set. (2) Do not leave a broken LCD Set on for a long time. To prevent any further damages, after checking the condition of the broken Set, make sure to turn the power (AC) off.
All manuals and user guides at all-guides.com 2. Preliminary Troubleshooting 1) LCD TV does not response or remote controller does not work. - Check the power cord to be plugged. - Check the battery of the remote controller. 2) Sound is discontinuous or broken sometimes. - Set the sound effect into 'MONO'.
All manuals and user guides at all-guides.com 3. Product Specification 32 INCH 42 INCH CHASSIS 32L1/ 32L2 42L1 / 42L2 South America Middle East South America Middle East LTA320AP27 LTA320AP27 LC420WUN-SBA1 LC420WUN-SBA1 Model name LTA320AN01 LTA320AN01 LC420WUN-SCA1 LC420WUN-SCA1 LCD Panel Pixel Pitch (mm x mm) 0.51075x0.51075 0.51075x0.51075...
All manuals and user guides at all-guides.com 4. Service mode. Using the Service Remote controller(R-74S01 or R-34SVC ), you can enter service mode directly. i r c Gumi Ch Map Write To set Gumi factory channels directly To set sound(display in sequence) Perss S3 key again and again, Volume Test change like this: ‘Volume Min’...
All manuals and user guides at all-guides.com 5. Hardware Trouble shooting 5-1) Power Supply Trouble Check E1 for 5V and E2 for 3.3V output ? Put on the TV, Check for C10 ,C16,E5 E3 for 5V Check power line or power supply output Check if U2 for 3.3V and U3 for 2.5V output?
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-2) Display Trouble (exceptional screen) Exceptional screen Check if the cable is correct and connected tightly and connected tightly Check if the LCD panel is OK Check if the output circuit from U12 to the jack to panel are normal Change the cable for panel...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-3) Display Trouble (white screen) White screen Check if the voltage of panel power supply is normal (depend on panel) supply is normal (depend on panel) Is there voltage on grid of Is there output signal Q8/3407 can changed from U12...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-4) Display Trouble (black screen) Black screen Check if the voltage on CN3/BLON is 5V Check if the power supply for inverter is normal Check the control circuit from Repair the power supply The inverter is damaged BLON to U12 or U12 is damaged -10-...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-5)Audio Trouble(No sound) No sound Is there audio input signal Check if the setting of volume and MUTE are normal Check if CN22 has output signal Check if the power supply of U13/R2A15122FP –pin13 –pin14 >11V Check if the voltage of Check if the voltage of...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-6) Function Trouble (TV video) TV can’t search any channel/no picture Confirm if the RF cable do have signal cable do have signal Check if T2-pin7 for 5V Check if T2-pin5,6 has C signal Check if t1-pin9&10have signal Check if T2-pin2 for variational...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-7) Function Trouble (PC) PC mode Picture is not Missing color, Picture No signal in center deflection color dithering Check if the R.G.B Check if the signal of input signal of U12 is normal V-sync,H-sync is OK Do “reset”...
All manuals and user guides at all-guides.com Hardware Trouble shooting 5-8) Function Trouble (SCART,HDMI,YPbPr,DVB/TV) SCART RGB .SCART Video. HDMI,S-VIDEO,CVBS HDMI,S-VIDEO CVBS does not Missing color, does not has the signal has the signal deflection color deflection color has the signal Check if the Check if R.G.B input k if R G B i...
All manuals and user guides at all-guides.com 7.Features of Main board MST6M181VS(without TELETEXT and NICAM) CHIPSET /MST6E181V (with TELETEXT and NICAM) MARKET AREA Asia-Pacific, Middle-East or South America OSD LANGUAGE Middle-East : English, Germany, Espanol, Arabic, Romania, France South America :English, French, Spanish, Portuguese Panel Type Interface Single/Dual LVDS Interface...
Page 18
All manuals and user guides at all-guides.com Features of Main board Ω × INPUT TERMINALS Component1 & Component1 5 RCA terminals(green, blue, red, Audio red, white) RCA terminals(green, blue, red) CVBS1 & Component2 & S-Video 2 RCA terminals( red, white) Audio OUTPUT AV (CVBS2) Out...
Page 19
All manuals and user guides at all-guides.com Features of Main board ELECTRICAL CHARACTERISTICS & REQUIREMENTS Ripple Power Supply Startup Rise Symbol Voltage Range Voltage Mode Current Time Time @25 ℃ ℃ 24V/12V/ 22V~25V 1000mA 240mV ≤ 100ms ≤ 50ms CN2(10PIN/2.54): MAIN POWER SUPPLY CONNECTOR SYMBOL DESCRIPTION Ground...
Page 20
All manuals and user guides at all-guides.com Features of Main board CN21(2 × × 20PIN/2.0): LVDS INTERFACE NOTE: PIN31~40 are optional. The connector or each PIN can refer to the panel specification. SYMBOL DESCRIPTION VSEL VSEL Power Supply for Panel VSEL Ground Ground...
Page 21
All manuals and user guides at all-guides.com Features of Main board CN22 (4PIN/2.54): SPEAKER CONNECTOR SYMBOL DESCRIPTION Ground CN24(4PIN/2.54): AMPLIFIER POWER SUPPLY CONNECTOR SYMBOL DESCRIPTION +24V DC Power Supply -21-...
All manuals and user guides at all-guides.com 8.Upgrade manual by USB port 1. Upgrading from USB port (build in Mainboard)— At working; 1.1 Copy F/W to USB disk, U:/ bin_6m181.bin (FileNameshouldbe renameto< bin_6m181.bin> and shouldbe set to root directory), plugUSB diskwhenTV running. 1.2 Run TV, <Menu>...
All manuals and user guides at all-guides.com Schematic 2) 42" POWER Schematic +24V CON1 +24V/8A VCC2 +12V +12V/3A VCC1 PFC-STOP DISABLE LINE STBY ISEN RFMIN +5VSB +12V +24V VCC2 ON/OFF +5VSB VCC1 +5VSB +12V +24V +12V +24V ON/OFF Title Size i s i : e t File:...