Step 3: Connecting The Power Cord; Step 4: Quick Setup - Sony DVP-NC600 Operating Instructions Manual

Step 3: Connecting the Power Cord

Plug the player and TV power cords (mains lead) into an AC outlet (mains).
Do not connect the power cord (mains lead) of your player to the "switched" power socket
(mains) of an amplifier (receiver). Otherwise, when you turn off the power of your amplifier
(receiver), the settings for the player may be lost.

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments to use the player. To
skip an adjustment press >, to return to the previous adjustment, press ..
POWER
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press ?/1 on the remote.
"Press [ENTER] to run QUICK SETUP." appears at the bottom of the screen. If this message
does not appear, select "QUICK" under SETUP in the Control Menu (page 13) to run Quick
Setup.
28
./> ENTER
X/x
?/1
1 2 3
4 5 6
7 8 9
0
./>
X/x
ENTER