Sony DVP-NC600 Operating Instructions Manual page 52

Notes
• When you select an effect, the sound cuts off for a
moment.
• When the playing signal does not contain a signal for
the rear speakers (page 49), the surround effects may
be difficult to hear.
• When you select one of the TVS modes, turn off the
surround setting of the connected TV or amplifier
(receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and that
the speakers are located in similar surroundings.
Otherwise, the TVS effect may be hard to discern.
• TVS NIGHT only works with Dolby Digital and
MPEG audio discs. However, not all discs will
respond to the TVS NIGHT function in the same
way.
• If you use the DIGITAL OUT (COAXIAL or
OPTICAL) jack, sound will come from your
speakers but it will not have the TVS effect.
52