Specifications - Sony DVP-NC600 Operating Instructions Manual

Specifications

System
Laser
Signal format system
Audio characteristics
Frequency response
Signal-to-noise ratio (S/N ratio)
Harmonic distortion
Dynamic range
Wow and flutter
The signals from LINE OUT L/R (AUDIO) 1/2 jacks are measured. When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the DIGITAL OUT (COAXIAL and OPTICAL)
48 kHz sampling frequency.
Outputs
Jack name
DIGITAL OUT
(OPTICAL)
DIGITAL OUT
(COAXIAL)
LINE OUT L/R
(AUDIO) 1/2
LINE OUT (VIDEO)
S VIDEO OUT
COMPONENT VIDEO
OUT (Y, C , C
B R
76
Jack type
Optical output jack
Phono jack
Phono jack
Phono jack
4-pin mini DIN
Phono jack
)
Semiconductor laser
PAL/NTSC (See page 15 to switch.)
DVD (PCM 96 kHz): 2 Hz to 44 kHz (±1.0 dB)
DVD (PCM 48 kHz): 2Hz to 22kHz (±0.5dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
115 dB (LINE OUT L/R (AUDIO) 1/2 jacks only)
0.003%
DVD: 103 dB
CD: 99 dB
Less than detected value (±0.001% W PEAK)
Maximum output
level
-18 dBm
0.5 Vp-p
2 Vrms (50 kilohms)
1.0 Vp-p
Luminance signal:
1.0 Vp-p
Color signal:
0.3 Vp-p (PAL)
0.286 Vp-p (NTSC)
Y: 1.0 Vp-p
C , C 0.7 Vp-p
:
B R
jacks
are converted to
Load impedance
Wave length 660 nm
75 ohms terminated
Over 10 kilohms
75 ohms, sync negative
75 ohms, sync negative
75 ohms terminated
75 ohms, sync negative
75 ohms terminated