Sony DVP-NC600 Operating Instructions Manual page 70

xDTS
Selects if DTS signals are output via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack.
OFF Select this when the player is connected
to an audio component lacking a built-in
DTS decoder. Note, however, that the
DTS signals contained in a CD are
output even if "OFF" is selected.
ON
Select this when the player is connected
to an audio component having a built-in
DTS decoder.
If the player is connected to an audio
component lacking a built-in DTS
decoder, do not set this. Otherwise,
when you play the DTS sound track, a
loud noise (or no sound) will come out
from the speakers, affecting your ears or
causing the speakers to be damaged.
Note
If you select one of the TVS settings while playing a
DVD, the player does not output the following signals
from the DIGITAL OUT (COAXIAL or OPTICAL)
jack .
• Dolby Digital signals (when you set "DOLBY
DIGITAL" in "AUDIO SETUP" to "D-PCM")
• MPEG audio signals
70