Sony DVP-NC600 Operating Instructions Manual page 26

Connecting to an AV amplifier (receiver) with a digital input jack having a
D
Dolby Digital, MPEG audio or DTS decoder, and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS decoder function
of your AV amplifier (receiver). You are not able to enjoy the TVS sound effects of the player.
xRecommended surround sound effects using this connection with your amplifier (receiver).
• Dolby Digital (5.1ch) (page 68)
• DTS (5.1ch) (page 70)
• MPEG audio (page 69)
z
To enhance the surround sound effects, refer to the operating instructions of the amplifier (receiver) for correct
speaker setting location.
Note
After you have completed the connection, be sure to set "DOLBY DIGITAL" to "DOLBY DIGITAL" (page 30). If
your AV amplifier (receiver) has a DTS decoder, set "DTS" to "ON" (page 30). If your AV amplifier (receiver) has
an MPEG audio decoder, set "MPEG" to "MPEG" (page
the speakers.
26
69
). Otherwise, no sound or a loud noise will come from