Base Ringer; Voice Prompts; Temporarily Turning Off The Message Alert Tone - AT&T CL82200 User Manual

Answering system
About the answering system

Base ringer

Press VOLUME on the telephone base to adjust the ringer volume when
the telephone is not in use.
You hear a sample of the ringer while adjusting the volume. The telephone
base announces, "Base ringer is off." when you set the volume to 0.

Voice prompts

The system provides voice prompts to guide you through remote access and
recording outgoing announcements.

Temporarily turning off the message alert tone

Pressing any telephone base key (except HANDSET LOCATOR) temporarily
silences the message alert tone.
If you press X DELETE when in idle mode, there is a voice prompt to direct you
to press X DELETE again to delete all old messages, and the message alert
tone is temporarily off.
The message alert tone is reactivated with the next incoming message.
42