Number Of Rings - AT&T CL82200 User Manual

Handset settings
Answering system settings
To delete your outgoing announcement:
1. When the handset is in idle mode, press MENU/
2. Press CID or
3. Press CID or
press /SELECT, the system announces, "To play, press
MENU
2. To record, press 7."
4. Press 3 to delete your recorded announcement.
When your announcement is deleted, the system answers calls with the pre-
recorded announcement described on the previous page.

Number of rings

You can set the answering system to answer an incoming call after two, four,
or six rings. You can also select toll saver, which is explained below. Unless you
change it, the answering system answers an incoming call after four rings.
To set the number of rings:
1. When the handset is in idle mode, press MENU/
enter the main menu.
2. Press CID or
/SELECT.
MENU
3. Press CID or
/SELECT.
MENU
4. Press CID or
/SELECT.
MENU
5. Press CID or
Toll saver.
• Toll saver - the answering system answers a call after two
rings if you have new messages, and after four rings when
there are no new messages. This feature allows you to
check for new messages and avoid paying long distance
charges when calling from out of your local area.
6. Press /SELECT to confirm your setting and you hear a
MENU
confirmation tone. Press
NOTE: If you subscribe to caller ID/call waiting services through your telephone service
provider, see Answering system and voicemail on page 40.
DIR to scroll to >Answering sys, then press
DIR to scroll to >Announcement, then
DIR to scroll to >Answering sys, then press
DIR to scroll to >Ans sys setup, then press
DIR to scroll to ># of rings, then press
DIR to scroll and choose among 2, 4, 6 or
OFF/
CLEAR
SELECT
SELECT
to cancel the procedure.
18
to enter the main menu.
/SELECT.
MENU
Announcement
>
Delete all old
to
Play messages
Answering sys
>
Ans sys setup
>
--End of list--
# of rings
>
Remote code
# OF RINGS
>2