Intercom - AT&T CL82200 User Manual

Multiple handset use

Intercom

Use the intercom feature for conversations between handsets. This feature is
not available for model CL82100.
Use the handset number to initiate intercom and transfer calls.
1. Press INT on your handset when not in use.
• If you have a two-handset system, your handset screen
shows Calling other handset.
• If you have more than two handsets, your screen shows
INTERCOM Use the dialing keys to e e nter a handset number.
Your handset screen shows Calling handset X.
The other handset rings and its screen shows either Other
handset is calling or Handset X is calling.
2. To answer the intercom call, press
SPEAKER or any dial pad keys (0-9, #, *) on the called
handset. Both handsets now show Intercom.
3. To end the intercom call, press INT or
the handset back in the telephone base or charger.
NOTES:
1. Before the intercom call is answered, you can cancel the intercom call by pressing
INT on the calling handset.
2. If the called handset is not answered within 100 seconds, or if it is in the directory or call log mode,
or is on a call, or is out of range, the calling handset shows the message Unable to call try again.
3. Pressing OFF/
4. You can use a maximum of two pairs of handsets to make intercom calls at a time. If there is an
incoming call, other system handsets ring but cannot answer the call by pressing
Only the handset on an intercom call can answer the incoming call by pressing
while the previous intercom call ends automatically.
Answer an incoming call during an intercom call
If you receive an incoming outside call during an intercom call, there is a two-
beep call waiting tone.
• To answer the call, press
To end the intercom call without canceling the incoming call, press
or MUTE/
CLEAR DELETE
PHONE/
PHONE/
FLASH
OFF/
CLEAR
temporarily silences the intercom ringer.
. The intercom call ends automatically.
FLASH
27
other handset
Other handset
is calling
, INT,
Intercom
, or place
PHONE/
PHONE/
OFF/
Calling
OFF/ or
CLEAR
.
FLASH
FLASH
.
CLEAR