Volume Control; Call Waiting; Mute; Options While On Calls - AT&T CL82200 User Manual

Telephone operation

Options while on calls

Volume control

While on a call, press VOLUME-/ CID to decrease or press
VOLUME+/ DIR to increase the listening volume. You
set the listening volume level (1-5) to one of five levels.
NOTES:
1. Handset and speakerphone volume settings are independent.
2. When the volume reaches the minimum or maximum setting, you hear
two beeps.

Call waiting

If you subscribe to call waiting service from your telephone service provider,
you hear two beeps if someone calls while you are already on a call. Press
FLASH to put your current call on hold and take the new call. Press
PHONE/
FLASH at any time to switch back and forth between the calls.
PHONE/
NOTE: Missed call-waiting call is not counted as missed call.

Mute

Use the mute function to turn off the microphone. You can
hear the caller, but the caller does not hear you.
To mute a call:
• Press MUTE/
shows Muted for a few seconds and the MUTE icon
appears until you turn off mute.
To un-mute a call:
• Press MUTE/
Microphone ON appears temporarily on the handset screen.
. When mute is on, the handset screen
DELETE
again. When mute is off,
DELETE
24
VOLUME/ CID or
VOLUME/ DIR
can
VOLUME
MUTE/DELETE
Phone
Muted
Phone
Microphone ON
0:00:30
MUTE
0:00:30