Web Server Control X8 - RGBlink X8 User Manual

Slave Unit
Slave Unit is to control multiple devices simultaneously, which are connected to same network. ("In the same
network" means the the the third section in the IP address digits are the same ) XPOSE do operation on one
device, same operation synchronized to other devices. For example, there is another devices linked to the same
network, one with IP IP192.168.0.45
If users need to back up operation from current running device to this device slave unit shall be used. First fill in
the quantity of to be linked devices, click Set Numbers,
Index, Device IP and State will come up.
Choose the IP address of the other device from drop down list, e.g IP192.168.0.45 and
Slide to ON, the red dot behind turns to green indicating that the device has been connected

3.3 Web Server Control X8

X8 supports Web control,operate as following steps:
1.Make sure your computer and the device are in the same network segment.
2.Type the IP address of the device in the web,and then login in,the interface of web control are the same as
XPOSE software.Please refer to <3.2 XPOSE Control X8>.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
40