Specifications - Sony RHT-G15 Operating Instructions Manual

Theatre stand system
Table of Contents

Advertisement

• If you connect the audio output of the video
component and the stand using other than an
HDMI cable, no sound may be output
because of "BRAVIA" Sync. In this case, set
"CTRL HDMI" to "OFF" (page 25) or
connect the audio output jack directly to the
TV instead of the stand.
If "PROTECTOR" and "PUSH POWER" appear
alternately in the front panel display.
Press ?/1 to turn off the stand, and check the
following item after "STANDBY" disappears.
• Is anything blocking the ventilation holes of
the stand?
After checking the above item and fixing
any problems, turn on the stand. If the cause
of the problem cannot be found even after
checking the above item, consult your
nearest Sony dealer.
If the stand still does not operate
properly after performing the
above measures, reset the stand
as follows:
Use buttons on the stand for the operation.
1
Press ?/1 to turn on the power.
2
Press ?/1 while pressing INPUT
SELECTOR and VOL –.
"COLD RESET" appears and the stand is
reset. AMP menu, sound field, etc., return to
the default settings.
34
GB

Specifications

Dimensions:
A
mm (approx.)
B
C
D
Inside dimension:
E
mm (approx.)
F
(Depth : 379 mm)
Mass: kg
1,550
400
452
400
200
1,365
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents