Connecting other components
When connecting components that do not have HDMI jacks, such as a "PlayStation 2" or a DVD
player, etc., set "CTRL HDMI" to "OFF" in the AMP menu of the stand (page 25). Even if "CTRL
HDMI" is set to "ON," you can enjoy a video cassette recorder, etc., that does not have surround
channels by connecting its audio and video output jacks directly to the TV instead of the stand.
DVD player, etc.
Digital Audio OUT
(coaxial)
VIDEO OUT
To the VIDEO IN of
the TV.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the stand to an outdoor FM
antenna (aerial) as shown below.
Digital
coaxial cord
(not supplied)
Outdoor FM antenna (aerial)
Rear of the stand
FM wire antenna (aerial) (supplied)
DIGITAL MEDIA
PORT adapter
Other audio
components, etc.
Audio signal OUT
Audio cord
(not supplied)
continued
13
GB