Other Information; Specifications; Confirming The Completion Of The Installation - Sony SU-WL400 Manual

Wall-mount bracket

Hide thumbs

Table of Contents

Available languages

Installing the TV on the wall

Connect the necessary cable(s) to

the TV.

Make sure to connect the cables before

installing the TV on the wall. You will be unable

to connect the cables when the TV is installed.

Refer to the operating instructions supplied

with your TV.

Note

 Subcontract the cable routing in the wall to a licensed

contractor.

 Bundle the connecting cables to prevent stepping on them

before wall mounting.

Install the TV onto the Base .

 For the location of the Pulleys  to the hang

on the Base , refer to the TV installation

dimensions table. For details, refer to the TV's

instruction manual.

 Hold the TV securely with both hands and

gently hang the Pulleys  attached to the

rear of the TV to the Base , making sure to

confirm the shape of the holes.

 After installing the TV on the wall, confirm

the Pulleys  are firmly latched into the Base

.

Refer to the "Installation Guide", .

WARNING

 Be sure that two or more persons hold the TV when

carrying it.

Preventing the bottom of the TV

from shifting.

 Take up the slack of Band  and attach it to

the wall tightly.

Refer to the "Installation Guide", .

 Use a 5 mm diameter screw or equivalent

(not supplied).

Note

 Try to pull the bottom of the TV forwards yourself slightly,

to make sure that it does not move forward. If there is any

movement, it is not fixed correctly, and the Band  should

be secured firmly again.

Confirming the completion of

the installation

Check the following points.

 The Pulleys  are firmly hung onto the Base .

 The cord and the cable are not twisted or

pinched.

 The Band  is tight with no slack.

WARNING

 Improper placement of the AC power cord, etc., may cause fire

or electric shock through a short circuit. Be sure to confirm the

completion of the installation for safety.