Table of Contents
Advertisement
• The time delay can be set from 15 seconds to 30 minutes. Check the time
delay setting for each RD‑250 in your multi‑way configuration. Ensure that all
RD‑250s have the same time delay setting. Ensure that there is no movement
within any of the sensors' view for the set time period. Hot air currents and
heat radiant devices can cause false detection. Make sure the sensor is at least
6 feet (2 meters) away from devices that are a significant heat source (e.g.,
heater, heater vent, high wattage light bulb).
If load does not respond properly after following troubleshooting, turn OFF
power to the circuit then check wire connections or call technical support.
COVER PLATES
WattStopper RD wall switches fit behind industry standard decorator style switch
cover plates.
WARRANTY INFORMATION
WattStopper warranties its products to be free of defects in materials
and workmanship for a period of five (5) years. There are no obligations
or liabilities on the part of WattStopper for consequential damages
arising out of, or in connection with, the use or performance of this
product or other indirect damages with respect to loss of property,
revenue or profit, or cost of removal, installation or reinstallation.
2800 De La Cruz Boulevard, Santa Clara, CA 95050
800.879.8585 • www.wattstopper.com
08703r3 3/2013
Please
Recycle
Advertisement
Table of Contents
