Configuring Image Parameters; Configuring Camera Parameters - HIKVISION DS-2AE5223TI-A User Manual

User Manual of HD-TVI Speed Dome

3.3 Configuring Image Parameters

3.3.3 Configuring Camera Parameters

Purpose:
You can set the camera parameters including focus, shutter speed, iris, etc.
Enter the camera parameters settings menu:
MAIN MENUS > DOME SETTINGS >CAMERA SETTINGS
CAMERA
WB MODE
RED
BLUE
IMAGE FLIP
FOCUS LIMIT
2D DNR
3D DNR
BACK
Task 1: Configure the focus settings.
 Setting the focus mode
Steps:
(1) Move the cursor to FOCUS using the direction buttons and click IRIS+ to enter.
(2) Click up/down direction buttons to set the focus mode to AF, MF or HAF.
AF (Auto-focus): The lens remains in focus during PTZ movements.
MF (Manual Focus): You need to adjust the focus with Focus+ and Focus- buttons manually.
HAF (Half-auto Focus): The speed dome focuses automatically only once after panning,
tilting and zooming.
(3) Click IRIS+ button to save the settings.
 Setting the focus limit
Purpose:
This function is used to limit the minimum focus distance. You can configure the focus limit
© Hikvision
CAMERA
FOCUS
ZOOM LIMIT
ZOOM SPEED
SLOW SHUTTER
DAY/NIGHT AUTO
D/N SENSITIVITY
SHARPNESS
BACK EXIT
AUTO MIN. ZOOM LIMIT
210 CHROMA SUPPRESS
150 SATURATION
OFF CONTRAST
1M SCENE MODE
1 HLC
2 SHARPNESS COMP
EXIT
Figure 3-7 Camera Settings
CAMERA
AF BLC/WDR
22 BLC LEVEL
HIGH EXP MODE
ON IRIS
SHUTTER
1 GAIN
8 EXPOSURE COMP
BACK
CAMERA
2.0
1
1
OFF
INDOOR
ON
15
BACK EXIT
OFF
N/A
AUTO
10
50
N/A
7
EXIT
CAMERA
GAIN LIMIT
DEFOG
INIT LENS
BACK EXIT
13
15
OFF
OFF