Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 2106C
Summary of Contents for Ronix 2106C
- Page 1 ELECTRIC DRILL 6.5MM 2106C...
-
Page 2: Technical Specifications
TECHNICAL SPECIFICATIONS Model 2106C Voltage 220V Frequency 50HZ Rated power 400W No-load speed 0-3800rpm Drilling Capacity 6.5mm, 6mm Weight PART LIST Chuck Forward/Reverse Trigger Lock ON/OFF Button GENERAL POWER TOOLS WARNING WARNING! - Read all safety warnings and all instructions, Failure to follow the warnings and instructions may result in electric shock, fire and or serious injury. -
Page 3: Electric Safety
- Don’t operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. - Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. - Page 4 Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. - Prevent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 5 Power tools are dangerous in the hands of untrained users. - Maintain power tools. Check for misalignment or binding of moving parts, breakage o parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
-
Page 6: Operation Regulations
1. Chuck key - For model 2106C with keyless chuck To install the bit, loose chuck by hand and place bit in the chuck as far USER MANUAL... -
Page 7: Switch Action
as it will go, and then tighten the chuck by hand. For fixing the bit well, keep the chuck and switch on machine for some seconds. To remove the bit, above mentioned procedure should be done vice versa. SWITCH ACTION CAUTION Before plugging in the tool, always check to see the switch trigger actuates properly and returns to the OFF position when released. -
Page 8: Service And Maintenance
REPAIRS Please only use accessories and spare parts recommended by RONIX. If the tool get malfunction, please hand over the tool to RONIX dealer or appointed RONIX SERVICE maintenance station. Don’t disassemble the tool by yourself or replace the parts supplied by others.
Need help?
Do you have a question about the 2106C and is the answer not in the manual?
Questions and answers