Ronix 2214 Instruction Manual

Ronix 2214 Instruction Manual

Impact drills 13mm


Quick Links



Table of Contents

Summary of Contents for Ronix 2214

  • Page 1 INSTRUCTION MANUAL 2214-2215 IMPACT DRILLS 13mm...
  • Page 3: Specification

    USER MANUAL SPECIFICATION Model 2214 2215 Action mode Impact Drill Impact Drill Rated voltage 220V 220V Frequency 50Hz 50Hz Rated power 750W 750W Chuck Dia. 13mm 13mm No load speed 0-2800rpm 0-2800rpm Wood: 25mm/Steel: 13mm/ Wood: 25mm/Steel: 13mm/ Drilling capacity...
  • Page 4: General Power Tool Safety Warnings

    IMPACT DRILL GENERAL POWER TOOL SAFETY WARNINGS WARNING! - Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and or serious injury. - Save all warnings and instructions for future reference. WORK AREA SAFETY - Keep work area clean and well lit.
  • Page 5: Personal Safety

    USER MANUAL edges or moving parts. Damaged or entangled cords increased the risk of electric shock. - When operating a power tool outdoors, use an extension cord suitable for outdoor use. Using a cord suitable for outdoor use will reduce the risk of electric shock. PERSONAL SAFETY - Stay alert, watch what you are doing and use common sense when operating a power tool.
  • Page 6 IMPACT DRILL collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. POWER TOOL USE AND CARE - Don’t force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
  • Page 7: Specific Safety Rules

    USER MANUAL SERVICE - Have your power tool serviced by qualified repair person using only identical replacement parts. This will ensure that the safety of power tool is maintained. - Follow instruction for lubricating and changing accessories. - Keep handles dry, clean and free from oil and grease. SPECIFIC SAFETY RULES Don’t let comfort or familiarity with product (gained from repeated use) replace strict adherence to impact drill safety rules.
  • Page 8: Functional Description

    IMPACT DRILL FUNCTIONAL DESCRIPTION WARNING! Always be sure that the tool is switched off and unplugged before installing or removing the bit. INSTALLING AND REMOVING THE BIT 1) To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand.
  • Page 9: Depth Gauge

    USER MANUAL DEPTH GAUGE The depth gauge is convenient for drilling holes of uniform depth. Insert the depth gauge into the hole in the grip base. Adjust the depth gauge to the desired depth and then tighten the clamp screw to secure the depth gauge. SWITCH ACTION 1) To start the tool, simply pull the switch trigger.
  • Page 10 CAUTION: After replacing brushes, running tool with no load for about 10 minutes. Then check the tool while running, when releasing the switch trigger. If the tool is not working well, ask nearest RONIX SERVICE after sales center for repair.
  • Page 11 USER MANUAL To maintain product safety and reliability, repairs, carbon brushes inspection and replacement or any other maintenance or adjustment should be performed by RONIX SERVICE after sales centers, always using RONIX replacement parts.

This manual is also suitable for:


Table of Contents