Removing The Shipping Struts; Commissioning Twindos; Determining The Water Hardness - Miele WXF 660 Operating Instructions Manual

Before using for the first time
3. Removing the shipping
struts

Damage resulting from failure to
remove the transit bars.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as
described in "Installation and
connection".
The following message appears in the
display:

Remove shipping struts
 Confirm with the OK sensor button.

4. Commissioning TwinDos

The UltraPhase 1 and UltraPhase 2
values are pre-set in the standard
settings and only need to be confirmed.
The following message appears in the
display:
 TwinDos
 Confirm with the OK sensor button.
The following message appears in the
display:
Set up now
 To set up TwinDos now, touch the
OK sensor button.
 To postpone setup until later, touch
the  sensor button until
appears in the display and press the
OK button to confirm.
18

Determining the water hardness

Water hardness is an indication of the
amount of minerals dissolved in water.
The more minerals in the water, the
higher the water hardness and more
detergent must be dispensed.
Useful tip: You can measure the water
hardness yourself using the enclosed
test strip. Alternatively, your local water
authority will be able to tell you the
hardness of water in your area.
 Dip the test strip in the water for
After approx. 1 minute, and based on
the coloration, you will be able to read
the water hardness from the table
below.
4 green areas
1 red area
2 red areas
Set up later
3 red areas
4 red areas
approx. 1 second. Shake excess
water off the test strip.
Test strip
 Hardness level I
 Hardness level II
 Hardness level III
Hardness range