Table of Contents
Advertisement
Before using for the first time
Push the UltraPhase 1 detergent
cartridge into compartment 1 until it
locks into position.
Settings for compartment
The UltraPhase 2 values are pre-set in
the standard default settings.
After the cartridge has been pushed in,
the display message switches to:
Agent for
Confirm with the OK sensor button.
Miele UltraPhase 2
Confirm with the OK sensor button.
The dispensing quantity for
UltraPhase 2 for (hardness level I)
is pre-set.
Per load
20
OK
OK
36
ml
OK
Confirm the pre-set value with the
OK sensor button. If you want to
change this value, use the
sensor buttons and confirm with
the OK sensor button.
UltraPhase 2
Hardness level I
Hardness level II
Hardness level III
The following will appear in the display:
Insert
Remove the film from the detergent
cartridge.
36 ml
45 ml
54 ml
Advertisement
Table of Contents
