Table of Contents
Advertisement
Switching on the washing
machine
Turn the program selector to a
program.
Program selection
There are three possible ways to select
a program:
1. Selecting the standard programs
with the program selector dial
Turn the program selector to the
required program.
The selected program will be shown in
the display. This will then be replaced
by the standard display.
2. Selecting a program
2. Selecting additional programs by
setting the program selector to
"Additional programs/" and using
the display:
Turn the program selector to the
Additional programs/ position.
The following appears in the display:
Table Linens/Drapes
Touch the sensor buttons until
the program you want appears in the
display.
Confirm the program with the OK
sensor button.
Pre-set program parameters will be
displayed, depending on the program
selected.
OK
25
Advertisement
Table of Contents
