Page 1
INSTALLATION INSTRUCTIONS FOR US, AU : ALL MODELS RPM LINKED KIT 1. PACKING LIST & ACTUAL IMAGE 2. GENERAL SAFETY INFORMATION 3. INSTALLATION INSTRUCTION D.D KIT#. TD26-A0032D U.S.A KIT#. DKA140 KIOTI TRACTOR DIVISION / DAEDONG-USA, Inc. 6300 Kioti Dr. Wendell, NC 27591...
Page 2
US, AU : ALL MODELS 1. PACKING LIST & ACTUAL IMAGE Part No. Description Q'TY Remark Part No. Description Q'TY Remark 04011-50100 PLAIN WASHER TD26-0234A CABLE, LINKAGE 19 04612-00100 SNAP RING TD26-0569A CABLE, LINKAGE-FR 20 04612-00160 SNAP RING TD26-0274B LEVER, CONNECTING 2...
US, AU : ALL MODELS 2. GENERAL SAFETY INFORMATION 3. INSTALLATION INSTRUCTION 1. Park the vehicle on firm and level ground. This symbol means ATTENTION! Then, engage the parking brake and stop the YOUR SAFETY IS INVOLVED. engine. The message that follows the sym- bol contains important information about safety.
Page 4
US, AU : ALL MODELS TD21AA04A TD21AA07C 4. Install the RPM bracket (7) to the steering column support with the flange bolt (14) and nut (16). TD21AA08C TD21AA18A TD21AA09A 6. Install the small microswitch (10) to the switch bracket (8) with the small washer based screw (17).
Page 5
US, AU : ALL MODELS TD21AA10A TD21AA12B 7. Install the cable assembly (1) to the RPM 9. Connect the pin sections of the link bracket (5) lever with the snap pin (13), and pull the and connecting lever 2 (3) with the spring (22).
Page 6
US, AU : ALL MODELS REMARKS <Before optional item installation> TD21AA15A TD21AA22A TD21AA23A ・ D etach the original governor cable and install it to the position B. TD21AA16A <After optional item installation> 11. Connect the linkage cable for the front section (2) to the connecting lever 2 (3) with the joint pin (27) and snap pin (23).
Page 7
US, AU : ALL MODELS TD21AA17A TD21AA21A 12. Install the instrument panel cover and steering undercover. Then, install the grip (11) to the lever and attach the decal (32). - 7 -...