Advertisement
13
Plate on motor
Loosen 2 and remove 1 preassembled
screw from the plate on motor. Save
screw for later use.
16
Blue
Black
Light fixture
Connect white wire from fan to white wire
from light fixture and then connect blue
(or black) wire from fan to black (or blue)
wire from light fixture.
Attach light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the preassembled screws on
the light pan. Twist clockwise till lock.
Reinstall the screw removed in step 15.
Tighten all screws securely.
© 2020 Monte Carlo Fan Collections
14
Light pan
Connect the quick connector from fan to
the quick connector from switch house
(light pan). Be sure they are clasped
together firmly.
Place light pan over the lead wires and
attach it onto the plate on motor, aligning
the keyhole slots on the light pan with the
preassembled screws on the plate. Twist
clockwise till lock.
Reinstall the screw removed in step 13.
Tighten all screws securely.
17
White
Install 2 x 9.3W medium base dimmable
LED bulbs. California Title 24 compliant
bulbs included.
Caution: Approved for use with LED light
bulb only (Part No. 97502S). Do not use
incandescent light bulb.
Caution: Do not replace bulb until it
cools down.
15
Loosen 2 and remove 1 preassembled
screw from light pan. Save screw for later
use.
18
Bulb
Attach glass by locating dimples in light
pan with grooves on the glass and twist
clockwise until tight.
5
Glass
3/2020
Advertisement
