Table of Contents General Introduction ........................1 Overview ........................1 Features ......................... 1 Framework and Dimensions ..................... 2 Installation............................ 3 Menu ............................. 5 HAVR Settings ......................5 4.1.1 Control Coaxial Device ..................5 Menu Operation ......................5 Appendix Maintenance ........................7...
Page 3
Welcome Thank you for purchasing our HDAVS camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference! Important Safeguards and Warnings Electrical safety •...
Page 4
Statement • Please refer to the actual product for more details; the manual is just for reference. • The manual will be regularly upgraded according to the product update; the upgraded content will be added in the manual without prior announcement. •...
General Introduction 1.1 Overview This series megapixel HD camera conforms to the HDAVS standard. It supports video signal high-speed long distance transmission without any delay. It can be controlled by the HAVR conforming to the HDAVS 1.2 Features High-performance CMOS image sensor, megapixel definition. ...
Framework and Dimensions See Figure 2-1 and Figure 2-2 for the dimension. The unit is mm. Figure 2-1 Figure 2-2 See Figure 2-3 for the cable. The unit is mm. Figure 2-3...
Installation Important Please install the device in time after it is taken apart, which is to avoid the camera module being exposed to damp environment for too long. Before the installation, please make sure the installation surface should be thick enough to sustain at least 3X weight of the camera.
Menu 4.1 HAVR Settings 4.1.1 Control Coaxial Device This HDAVS camera series can adjust OSD menu via coaxial control. After connected the camera to the HDAVS series HAVR, from Main Menu->Setting->System->PTZ, you need to select the channel number for access and set control mode as HDAVS and the protocol as ICR-SD1.
Page 10
Figure 4-3 See Sheet 4-1 for the details of button functions. Button Function Open menu Select menu item 、 Select menu value 、 Adjust lens zoom and auto trigger focus Note: Adjust lens focus Some of the buttons can only be applied for the motorized Auto focus under current vari-focal camera.
Appendix Maintenance Attention: Please maintain the device according to the following instructions in order to ensure the image effect and long-term stable operation of the device. Maintenance for lens and mirror surface The lens and mirror surface are covered with antireflection coating, so it may produce hazardous substance and lead to performance reduction or scratch, dimness etc when it is stained with dust, grease, fingerprint and so on, please refer to the following methods to deal with once dirt is found:...
Page 12
Note • This manual is for reference only. Slight difference may be found in the user interface. • All the designs and software here are subject to change without prior written notice. • All trademarks and registered trademarks mentioned are the properties of their respective owners.
Need help?
Do you have a question about the AVS-4MB4016-IR and is the answer not in the manual?
Questions and answers