Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ICRealtime ICIPD2730
Summary of Contents for ICRealtime ICIPD2730
- Page 1 HD IR Vari-focal Dome Network Camera User’s Manual Version 1.0.0...
- Page 2 Welcome Thank you for purchasing our Network camera! This user’s manual is designed to be a reference tool for your system. Please read the following safeguard and warnings carefully before you use this series product! Please keep this user’s manual well for future reference!
-
Page 3: Important Safeguards And Warnings
Important Safeguards and Warnings 1．Electrical safety All installation and operation here should conform to your local electrical safety codes. The power shall conform to the requirement in the SELV (Safety Extra Low Voltage) and the Limited power source is rated 12V DC or 24V AC in the IEC60950-1. (Refer to general introduction) Please note: Do not connect two power supplying sources to the device at the same time;... - Page 4 Do not touch the CCD (CMOS) optic component. You can use the blower to clean the dust on the lens surface. Always use the dry soft cloth to clean the device. If there is too much dust, please use the water to dilute the mild detergent first and then use it to clean the device.
-
Page 5: Table Of Contents
Table of Contents General Introduction ......................... 1 Overview ........................1 Features ......................... 1 Specifications ........................ 2 Structure ............................. 6 Components ........................6 Framework and Dimension ..................7 Alarm Setup ........................7 Device Installation ........................10 Installation Steps ......................10 Micro SD Card Installation ..................11 Lens Adjustment ...................... -
Page 6: General Introduction
1 General Introduction 1.1 Overview This series network camera integrates the traditional camera and network video technology. It adopts video data collection, transmission together. It can connect to the network directly without any auxiliary device. This series network camera uses standard H.264 video compression technology, which maximally guarantees the video quality. -
Page 7: Specifications
Support motion detect. Backlight compensation: screen auto split to realize backlight compensation to adjust the bright. Support video watermark function to avoid vicious video modification. Built-in IR light. Support IR night vision. 1.3 Specifications Please refer to the following sheet for network camera performance specification. Model ICIP D2730 ICIP D3730... - Page 8 Support flip, rotation mode function. Snapshot Max 1f/s snapshot. File extension name is JPEG. Privacy Mask Supports max 4 privacy mask zones Support max 4 ROI zones Video Setup Support parameter setup such as bright, contrast, acutance Video Channel title, time title, motion detect, camera masking, overlay Information Lens 2.8～12mm/F1.4（manual focus）...
- Page 9 System Bit stream statistics, log, and software version. Status Image Sensor 1/2.8-inch CMOS 1/3-inch CMOS Pixel 1920(H)*1080(V) 2048(H)*1536(V) Day/night Support day/night mode switch Gain Control Fixed/Auto White Balance Manual/Auto On/Off Electronic Manual/Auto Shutter It ranges from 1/3 to 1/100000 Video Compression H.264/H.264H/MJPEG Standard...
- Page 10 Activation event: Audio/ video storage, image snapshot, log, email SMTP and etc. Record Manual >Video detect>Schedule Priority Storage NAS Storage Management Wire Network 1-ch Ethernet Port, 10/100 Base-T Ethernet Standard HTTP, TCP/IP, ARP,IGMP, ICMP, RTSP, RTP,UDP, RTCP, Network SMTP, FTP, DHCP, DNS, DDNS, PPPOE, UPNP, NTP, Bonjour, SNMP, Protocol QoS, 802.1x.
-
Page 11: Structure
2 Structure Note: There are differences about wire structure for some product models, please refer to the actual object for more details. 2.1 Components You can refer to the following figure for component structure. See Figure 2-1 Figure 2-1 Component structure Please refer to the following sheet for detailed information. -
Page 12: Framework And Dimension
Port Port Name Note Power input port Port 3 Connect to DC 12V power, input power. Alarm signal input/output (optional, Port 4 I/O port supported by some product models) Network data in/out and PoE. Port 5 Internet access port Note: ... - Page 13 Note: Only supported by some series products. Alarm input, output description: Step 1 Connect alarm input device to the alarm input of I/O cable. Step 2 Connect alarm output device to the alarm output of I/O cable, alarm output is collector open circuit output which connects 10K resistor to 3.3V externally.
- Page 14 Figure 2-4...
-
Page 15: Device Installation
3 Device Installation 3.1 Installation Steps Manual Focus Camera Motorized Vari-focal Camera Figure 3-1 Important Before the installation, please make sure the installation environments can at least support 3x weight of the camera. Please follow the steps listed below to install the device. Please refer to Figure 3- for reference. Step 1 Use inner hex wrench in the accessories bag to open dome enclosure by unfastening three inner hex screws on enclosure. -
Page 16: Micro Sd Card Installation
Hold rotating bracket on both sides with hand, horizontally rotate bracket, adjusting lens horizontal direction to designated position. Loosen two hand screws on both sides of fixed rotating bracket. (Loosen only, do not take it down), hold the camera module body with hand, making lens rotate vertically. -
Page 17: Lens Adjustment
Figure 3-3 Micro SD Card installation illustration 1 Figure 3-4 Micro SD Card installation illustration 2 3.3 Lens Adjustment After you take off the dome housing, you will see the adjusting screw nut of the lens, adjusting screw nut C is for zoom function, adjusting screw nut D is for focus function. Make sure to lock the adjusting screw after the image is clear. -
Page 18: Quick Configuration Tool
4 Quick Configuration Tool 4.1 Overview Quick configuration tool can search current IP address, modify IP address. At the same time, you can use it to upgrade the device. Please note the tool only applies to the IP addresses in the same segment. 4.2 Operation Double click the “ConfigTools.exe”... - Page 19 Figure 4-2 Login prompt After you logged in, the configuration tool main interface is shown as below. See Figure 4-4. Figure 4-3 Main interface For detailed information and operation instruction of the quick configuration tool, please refer to the Quick Configuration Tool User’s Manual included in the resources CD.
-
Page 20: Web Operation
5 Web Operation This series network camera products support the Web access and management via PC. Web includes several modules: Monitor channel preview, system configuration, alarm and etc. 5.1 Network Connection Please follow the steps listed below for network connection. ... - Page 21 Figure 5- 2 Web login After you successfully logged in, please install WEB plug-in unit. Please refer to the Web Operation Manual included in the resource CD for detailed operation instruction. See Figure 5- 3. Figure 5- 3 Web monitoring window...
-
Page 22: Appendix Toxic Or Hazardous Materials Or Elements
Appendix Toxic or Hazardous Materials or Elements Toxic or Hazardous Materials or Elements Component Name Cr VI PBDE Circuit Board ○ ○ ○ ○ ○ ○ Component ○ ○ ○ ○ ○ ○ Device Case ○ ○ ○ ○ ○ ○...
Need help?
Do you have a question about the ICIPD2730 and is the answer not in the manual?
Questions and answers