Wall Mounting - Siemens SIMATIC NET SCALANCE W786 Series Operating Instructions Manual

Figure 5-3
5.4

Wall mounting

Drilling template
Note
Installation location
The following should be noted with regard to the installation location:
• Devices with an internal antenna must be aligned according to the characteristics of the
internal antenna (refer to the technical specifications of the antenna --> Radiation pattern
diagrams). Since the internal antennas are integrated in the housing, the location and
alignment of the housing decides the radiation direction of the antennas.
• There are no restrictions relating to devices without internal antennas.
The location of the holes for mounting the SCALANCE W786 on a wall is shown in the following
figure:
SCALANCE W786-x
Operating Instructions, 12/2021, A5E03678337-14
Grounding connector on the rear of the SCALANCE W786
Installation and removal
5.4 Wall mounting
35