Installing Mounting Plate On A Din Rail - Siemens SIMATIC NET SCALANCE W786 Series Operating Instructions Manual

Installation and removal
5.5 Mounting with mounting plate
5.5.4

Installing mounting plate on a DIN rail

Procedure
Figure 5-10
Follow the steps below to fit the mounting plate to a DIN rail:
1. Place the mounting plate with the two catches (position A in the figure above) on the upper
edge of the DIN rail.
2. Pull down the DIN rail sliding catch (position B in the figure above) and press the mounting
plate against the DIN rail until the sliding catch engages.
42
A
A
B
Mounting plate with fittings for DIN rail mounting
Operating Instructions, 12/2021, A5E03678337-14
SCALANCE W786-x