Lightning Protection; Terminating Resistor; Antennas - Siemens SIMATIC NET SCALANCE W786 Series Operating Instructions Manual

Flexible connecting cable IWLAN QMA/N-Connect male/female
Adapter cable for connecting a MIMO antenna with QMA connectors with the flexible
connecting cables. Preassembled with two connectors QMA male and N-Connect female. pack
of 3
Length
1 m
For railway applications, the following connecting cable is available Note: Scope of delivery:
Pack of 1
Length
1 m
4.4.3.2

Lightning protection

Lightning protection
Component
LP798‑1N
LP798‑2N
4.4.3.3

Terminating resistor

Terminating resistor
Component
TI795-1R
4.4.3.4

Antennas

Note
When you select an antenna, keep in mind the national approvals for your device.
You can find additional information under Certification (Page 83).
The SCALANCE W786-2IA RJ45 uses internal omni antennas (3 dBi at 2.4 GHz and 4 dBi at 5 GHz).
SCALANCE W786-x
Operating Instructions, 12/2021, A5E03678337-14
Description
Lighting protector with N/N female/female connector
with gas discharge technology
Lighting protector with N/N female/female connector
with quarter wave technology
Description
Electrical connection
R-SMA male termination impedance
2.4 and 5 GHz, IP65, 0...6 GHz
pack of 3
Article number
6XV1875-5JH10
Article number
6XV1875-5VH10
Article number
6GK5798-2LP00-2AA6
6GK5798-2LP10-2AA6
Article number
6GK5795-1TR10-0AA6
Description
4.4 Accessories
21